Chapter 2 Modem Configuration Commands
2.1 Modem Configuration Commands
2.1.1 debugging modem
Syntax
debugging modem { at | event } [ interface type number ]
View
All views
Parameter
at: Enable Modem at command debugging.
event: Enable Modem event debugging.
interface type number: Interface name and number.
Description
Using the debugging modem command, you can enable Modem debugging.
According to the information output after executing this command, the user can make
sure whether the correct Modem script has been specified for a particular event.
Example
None
2.1.2 modem
Syntax
modem [ in | out ]
View
Interface (asynchronous serial interface, AUX or AM port) view
Dial-Up
27