Tunnel Timer Hello - 3Com 3C13618 Command Reference Manual

1.1.19 tunnel timer hello

Syntax
tunnel timer hello hello-interval
undo tunnel timer hello
View
L2TP group view
Parameter
hello-interval: The interval that the LAC or LNS waits for sending Hello packets when
there is no traffic over the tunnel, ranging from 60 to 1000, in second. By default, the
Hello packets are sent every 60 seconds.
Description
Using the tunnel timer hello command, you can configure the interval for sending
Hello packets over an L2TP tunnel. Using the undo tunnel timer hello command,
you can restore the interval for sending Hello packets over an L2TP tunnel to the
default value.
This command can be used on both LAC and LNS, and is an optional configuration.
The interval of sending Hello packets configured on LAC can be different from that on
LNS. The undo tunnel timer hello command can be used to restore the interval to
the default value.
Example
# Set the interval for sending Hello packets to 99 seconds.
[3Com-l2tp1] tunnel timer hello 99
VPN
19