3Com 3C13618 Command Reference Manual page 35

For related commands, see get.
Example
# Upload the configuration file of the local router to the TFTP server with the IP
address 10.110.1.1, and name the file as config.txt.
[3Com]copy 10.110.1.1 config.txt config
start uploading config file...
........
2465 bytes copied in 0.749 seconds.
end uploading config file.
If the upload operation is successful, the output information will display the uploaded
bytes and the time duration. If it fails, the error code (errno) will be displayed. The
meaning of each errno is explained in the following table:
Table 1-1 Errno Description
0x00
0x01
0x02
0x03
0x04
0x05
0x06
0x07
0x0b
0x0c
0x0d
0x0e
0x0f
0x10
0x11
0x12
0x13
0x14
0x15
0x16
0x18
Operation
Succeeds
Inadequate memory
Failed to create a request packet.
Failed to create a socket.
Failed to bind the socket.
Invalid transmission mode
Partial file was transmitted.
Unable to transmit data to the server.
Failed to create socket.
Failed to read the file.
Failed to resolve the host name.
Failed to open the local file.
Invalid parameter
Received error packets.
Failed to synchronize.
Failed to write the configuration file.
Failed to read the configuration file.
Multiple users wrote the configuration file concurrently.
Failed to allocate the memory.
The file was too long.
Failed to write the file.
System Management
Description
19