3Com Router Command Reference Guide — V1.00
Description
Using the reset dlsw bridge-entry command, you can reset the buffer memory
information on DLSw bridge set entry.
Example
None
6.1.27 reset dlsw circuits
Syntax
reset dlsw circuits [ circuit-id ]
View
All views
Parameter
circuit-id: The virtual circuit number, the value range is 0~4294967295.
Description
Using the reset dlsw circuits command, you can reset information on the DLSw
circuits.
Example
None
6.1.28 sdlc controller
Syntax
sdlc controller sdlc-address
undo sdlc controller sdlc-address
View
Synchronous interface view
116