3Com Router Command Reference Guide — V1.00
View
All views
Parameter
None
Description
Using the reset rmon statistics command, you can reset the entire RMON statistic
data of the Ethernet interface.
For related commands, see rmon promiscuous, display rmon statistics.
Example
# Clear all the RMON statistical data of the Ethernet interface.
[3Com] reset rmon statistics
3.2.3 rmon promiscuous
Syntax
rmon promiscuous
undo rmon promiscuous
View
Ethernet interface view
Parameter
None
Description
Using the rmon promiscuous command, you can enable the RMON statistics
function of the Ethernet interface. Using the undo rmon promiscuous command,
you can disable the RMON statistics function.
By default, the RMON statistics function is disabled.
The router can collect the original data needed by RMON only when RMON statistics
function at the Ethernet interface is enabled. Otherwise the statistics data cannot be
viewed via RMON.MIB. If the Ethernet interface is configured with the Bridge protocol,
64