3Com 3C13618 Command Reference Manual page 626

3Com Router Command Reference Guide — V1.00
Parameter
policy-name: The specified routing policy name. The name is defined by route-policy
command.
Description
Using the ip policy route-policy command, you can enable policy routing on the
interface. Using the undo ip policy route-policy command, you can cancel an
existent policy routing from an interface.
By default, the interface policy routing is prohibited.
For related commands, see route-policy.
Example
# Adopt policy routing AAA on the interface Ethernet 0.
[3Com-Ethernet0] ip policy route-policy AAA
138