3Com 3C13618 Command Reference Manual page 853

By default, the system does not specify the script.
If this command is configured, the specified Modem script will be executed for
initializing the asynchronous device connected to the interface when the system is
powered on and rebooted.
For related commands, see script-string, start-chat, script trigger login , script
trigger connect , script trigger dial, script trigger logout.
Example
# Set the system to execute "example" when the system is powered on and rebooted.
[3Com-Serial0]script trigger init example
2.1.9 script trigger login
Syntax
script trigger login script-name
undo script trigger login
View
Interface (asynchronous serial interface, AUX or AM port) view
Parameter
script-name: The name of Modem script.
Description
Using the script trigger login command, you can configure the Modem script that will
be executed when an outgoing call connection is successfully established. Using the
undo script trigger login command, you can cancel this feature.
By default, no Modem script is configured.
If this command is configured, the specified script will be executed start anytime when
an outgoing call connection is established. This script can be the registration
information on a remote system. For example, when a router is connected to a remote
UNIX server, this script can be used to log onto the remote server by sending login
string and password to the UNIX server.
For related commands, see script-string, start-chat, script trigger connect , script
trigger logout, script trigger dial, script trigger init.
Dial-Up
33