Display Ike Proposal - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference — V1.00
Description
Using the dh command, you can configure the Diffie-Hellman group id for an IKE
policy. Using the undo dh command, you can restore the default value.
By default, the setting is 768-bit Diffie-Hellman group.
For related commands, see ike proposal, display ike proposal.
Example
# Configure Diffie-Hellman for IKE policy 10.
[3Com] ike proposal 10
[3Com-ike-proposal-10] dh group1

5.1.5 display ike proposal

Syntax
display ike proposal
View
All views
Parameter
None
Description
Using display ike proposal command, you can view the IKE IPSec policy.
display ike proposal displays IKE policies in priority order. For example, the
encryption algorithm is DES-CBC, the hash algorithm is MD5, authentication is
implemented in the share encryption key mode, the DH group is MODP1024 and the
life time is 5000 seconds.
For related
encryption-algorithm, authentication-algorithm, dh, sa duration.
Example
# Display the IKE security policy.
[3Com] display ike proposal
Protection policy suite with priority 10
encryption
92
commands, see
: DES_CBC
authentication-method, ike proposal,