3Com Router Command Reference — V1.00
Logic channel view
Parameter
type: Interface type.
number: Interface number.
priority: Priority of a standby interface, ranging from 0 to 255, being 0 by default. The
greater the value is, the higher the priority is.
Description
Using the standby interface command, you can configure a certain physical interface
as a standby interface for the main interface. Using the undo standby interface
command, you can cancel a specified standby interface.
By default, no standby interface is specified.
A certain physical interface can be specified as a standby interface. One main
interface can have multiple standby interfaces which will be used according to their
priorities, that is, the standby interface with higher priority is preferred to being used
first.
Example
# Specify Serial 1 whose priority value is 50 as the standby interfaces for Serial 0.
[3Com-Serial0]standby interface serial 1 50
1.1.4 standby logic-channel
Syntax
standby logic-channel number [ priority ]
undo standby logic-channel number
View
Interface view
Logic channel view
Parameter
number: Number of the logic channel
4