Chapter 1 Dcc Configuration Commands - 3Com 3C13618 Command Reference Manual

Chapter 1 DCC Configuration Commands

1.1 DCC Configuration Commands
1.1.1 debugging dialer
Syntax
debugging dialer { event | packet }
View
All views
Parameter
event: Enable DCC event debugging.
packet: Enable DCC packet debugging.
Description
Using the debugging dialer command, you can enable DCC debugging.
Example
None
1.1.2 dialer autodial-interval
Syntax
dialer autodial-interval seconds
undo dialer autodial-interval
View
Physical or dialer interface view
Dial-Up
3