Display Ip Ip-Prefix - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
Parameter
tag-value: Specify the tag value of the OSPF routing information.
Description
Using the apply tag command, you can set the OSPF tag value. Using the undo
apply tag command, you can cancel configuration of setting the OSPF tag value.
By default, not to set the OSPF tag value.
For related commands, see if-match interface, if-match ip address , if-match ip
next-hop, if-match cost, if-match tag, if-match route-type, route-policy, apply ip
next-hop, apply local-preference, apply cost, apply origin.
Example
# Define an apply clause; when it is used for routing information attribute setting, set
the tag value for the routing information to 100.
[3Com-route-policy] apply tag 100

5.1.8 display ip ip-prefix

Syntax
display ip ip-prefix [ prefix-list-name ]
View
All views
Parameter
prefix-list-name: Prefix list name.
Description
Using the display ip ip-prefix command, you can view the defined address prefix
lists.
If no prefix-list-name is specified, all the configured prefix lists will be displayed.
For related commands, see ip ip-prefix .
Example
# Display the information of the prefix list whose name is p1.
118