Nat Outbound Interface - 3Com 3C13618 Command Reference Manual

Parameter
acl-number: The number of the ACL.
pool-name: The name of the NAT address pool.
Description
Using the nat outbound address-group command, you can associate the ACL with
an address pool. Using the undo nat outbound address-group command, you can
cancel the association between an ACL and the address pool.
Example
# The host computers of the 10.110.10.0/24 network segment are allowed for
address translation, selecting the addresses from 202.110.10.10 to 202.110.10.12 as
the translated address. Assume that Serial0 port is connected to ISP.
[Quidway]acl 1
[Quidway-acl-1]rule permit source 10.110.10.0 0.0.0.255
# Configure the address pool
[Quidway] nat address-group 202.110.10.10 202.110.10.12 pool 1
# Add correlation between the address list and the address pool.
[Quidway-Serial0] nat outbound 1 pool 1

2.6.7 nat outbound interface

Syntax
nat outbound acl-number interface
undo nat outbound acl-number interface
View
Interface view
Parameter
acl-number: Address list index configured through acl command..
Description
Using the nat outbound interface command, you can associate the ACL with an
interface. Using the undo nat outbound interface command, you can cancel the
association between the ACL and an interface. Translate the source address of the
Network Protocol
45