Example
# Configure the POS application 0 and asynchronously connects it to the UNIX
front-end processor on the Serial0 of the router.
[3Com] pos-server app flow 0 serial0
5.1.9 pos-server app tcp
Syntax
pos-server app tcp app-number ip-address port-number
undo pos-server app interface-number
View
System view
Parameter
app-number: Number of POS application, ranging from 0 to 31. A router can be
configured with up to 32 POS applications.
ip-address: Destination address of the POS application in the TCP/IP connection.
port-number: Port number of the POS application in the TCP/IP connection.
Description
Using the pos-server app tcp command, you can configure the POS application in
the TCP/IP mode. Using the undo pos-server app tcp command, you can cancel a
POS application.
By default, no POS application is configured.
The POS access router is connected to a UNIX front-end processor in the following
two ways: asynchronous connection and TCP/IP connection. The commands used in
these two ways are different.
Example
# Configure the POS application 1, whose IP address is 1.1.254.78 and port number
is 9010.
[3Com] pos-server app tcp 1.1.1.254.78 9010
System Management
89