3Com 3C13618 Command Reference Manual page 216

Syntax
display pppoe-client session { summary | packet } [dial-bundle-number number ]
View
All views
Parameter
summary: Displays the summary of PPPoE sessions.
Packet: Displays the statistics of the received and transmitted data of PPPoE sessions.
dial-bundle-number number: Displays the statistics of a specified PPPoE session. If
no session is specified, the statistics of all the sessions will be displayed.
Description
Using the display pppoe-client session summary command, you can view the state
of PPPoE sessions and statistics.
Example
# Display the summary of the PPPoE sessions.
[3Com]display pppoe-client session summary
PPPoE Client Session:
SID RemMAC
===================================================================
1 00049a23b050 00e0fc0254f3
2 00049a23b050 00e0fc0254f3
The output information is explained in the following table.
Table 2-2 Description of the output of display pppoe-client session summary
SID
RemMAC
LocMAC
VA
Dialer
Bundle-number
OIntf
State
# Display the statistics of the received and transmitted data of PPPoE sessions.
[3Com]display pppoe-client session packet
PPPoE Client Session:
LocMAC VA
Field
Session ID, which is the number of PPPoE session
Remote MAC address
Local MAC address
Virtual access interface associated to a PPPoE session
Dialer interface for establishing PPPoE session
dialer bundle associated to a PPPoE session
Ethernet interface for establishing PPPoE session
State of PPPoE session
Dialer Bundle-number OIntf
1 1 1
2 2 2
Description
Link Layer Protocol
State
Eth0 PPPUP
Eth0 PPPUP
23