Current count = 0,
Peer Link name = Serial1
6.1.18 ebs
Syntax
ebs [ inbound | outbound ] excess-burst-size
undo ebs [ inbound | outbound ]
View
Frame Relay class view
Parameter
inbound: Set the Be of incoming packets. This parameter is valid only when the Frame
Relay traffic policing is enabled on the interface.
outbound: Set the Be of outgoing packets. This parameter is valid only when Frame
Relay traffic shaping is enabled on the interface.
excess-burst-size: Excess burst size, in the range from 0 to 16000000 bits. By default,
excess-burst-size is 0 bit.
Description
Using the ebs command, you can configure the excess burst size (Be) of the Frame
Relay PVC. Using the undo ebs command, you can restore the default Be of the
Frame Relay PVC.
Excess burst size is the difference between the maximum packet traffic allowed to send
by a Frame Relay PVC within the first interval Tc and the committed burst size (Bc).
For related commands, see cbs, cir allow, cir.
Example
# Set the excess burst size to 32000 bits.
[3Com-fr-class-one]ebs 32000
6.1.19 fifo queue-length
Syntax
fifo queue-length queue-size
undo fifo queue-length
View
Frame Relay class view
Link Layer Protocol
105