Filter-Policy Import - 3Com 3C13618 Command Reference Manual

the BGP. Using the undo filter-policy export command, you can cancel the filtering
for the exporting routes.
By default, the exported routing information is not filtered.
This command affects route exporting by the BGP. If protocol is specified, only the
routes of the specified protocol are filtered, while the imported routes of the other
protocols are not. If protocol is not specified, the imported routes of all protocols will
be filtered.
Example
# Filter all routes exported by the BGP by access list 1.
[3Com-bgp] filter-policy 1 export

4.1.29 filter-policy import

Syntax
filter-policy gateway prefix-list-name import
undo filter-policy gateway prefix-list-name import
filter-policy acl-number import
undo filter-policy acl-number import
filter-policy ip-prefix prefix-list-name { gateway prefix-list-name | import }
undo filter-policy ip-prefix prefix-list-name { gateway prefix-list-name | import }
View
BGP view
Parameter
acl-number: Configure the access list number of the destination address matching
routing information.
prefix-list-name: Address prefix list name.
For detailed description of various parameters, refer to the filter-policy import
command of chapter 5 "IP Routing Policy Configuration Commands".
Description
Using the filter-policy gateway import command, you can configure to filter the
routing information exported from the specified address. Using the undo filter-policy
Routing Protocol
91