3Com 3C13618 Command Reference Manual page 520

3Com Router Command Reference Guide — V1.00
View
Interface view
Parameter
None
Description
Using the rip work command, you can enable the interface running RIP. Using the
undo rip work command, you can disable it.
By default, the RIP is enabled work at the interface
rip work works together with rip input ,rip output and network commands.
For related commands, see network, rip input, rip output.
Example
# Enable RIP work at Serial 0.
[3Com-Serial0] undo rip work
2.1.24 summary
Syntax
summary
undo summary
View
RIP view
Parameter
None
Description
Using the summary command, you can enable the RIP-2 automatic route
aggregation. Using the undo summary command, you can disable the RIP-2
automatic route aggregation.
By default, RIP-2 route aggregation is adopted.
32