Snmp-Agent Trap Life; Snmp-Agent Trap Queue-Size - 3Com 3C13618 Command Reference Manual

Example
# Enable the router to send traps to 10.110.30.253, and the community name "public"
is used.
[3Com] snmp-agent trap enable
[3Com] snmp-agent target-host trap address 10.110.30.253 securityname public
c

3.1.21 snmp-agent trap life

Syntax
snmp-agent trap life timeout
undo snmp-agent trap life
View
System view
Parameter
timeout: Timeout values are in seconds, ranging from 1 to 1000. By default, traps time
out after 30 seconds.
Description
Using the snmp-agent trap life command, you can configure the timeout time that
traps can be held. Using the undo snmp-agent trap life command, you can restore
the default timeout time that traps can be held.
Suppose that the system is set to hold traps for some time, if a trap times out, it will
be discarded and the system will not transmit it or hold it any longer.
For related commands, see snmp-agent, snmp-agent trap enable.
Example
# Set the traps to time out after 60 seconds.
[3Com] snmp-agent trap life 60

3.1.22 snmp-agent trap queue-size

Syntax
snmp-agent trap queue-size length
System Management
59