3Com 3C13618 Command Reference Manual page 528

3Com Router Command Reference Guide — V1.00
Parameter
None
Description
Using the display ospf command, you can view the main information of the OSPF
routing selection process.
Information output via this command helps the user with OSPF fault diagnosis.
Example
# Display the general information about OSPF.
[3Com] display ospf
RouterID: 0.0.0.1
Routing selection preference: Inter/Intra: 10 External: 150
Default ASE parameters:
SPF computation count: 73
Area 0.0.0.0:
Area 0.0.0.1:
40
Border Router: Area
Authtype: none Flags: <>
SPF scheduled: <>
Interface: 10.10.0.2 (Serial0) --> 10.10.0.1
Cost: 10 State: P To P
Priority: 1
DoNotAge Lsa Allowed
Timers: Hello 10,
AS Border Routes:
Area Border Routes:
Authtype: none Flags: <>
SPF scheduled: <>
Interface: 10.110.10.1 (Ethernet0)
Cost: 10 State: DR
Priority: 1
Designated Router: 10.110.10.1
DoNotAge Lsa Allowed
Timers: Hello 10,
AS Border Routes:
Area Border Routes:
Metric: 1 Tag: 0.0.0.1
Type: PointToPoint
Dead 40, Poll 0,
Type: Broadcast
Dead 40, Poll 0,
Type: 2
Retransmit 5
Retransmit 5