3Com 3C13618 Command Reference Manual page 23

display current-configuration fr-class
display current-configuration voice { aaa | access-number | acct-method | cdr }
View
All views
Parameter
global: Display the current system configuration of the router.
interface type [ number ]: Display all of the current interface configurations of the
router.
ip { route | route-policy }: Display the current IP route and routing policy
configuration of the router.
protocol protocol: Display all of the current routing protocol configurations of the
router.
ike-proposal: Display the current IKE proposal configuration of the router.
ipsec-policy: Display the current IPSec policy configuration of the router.
ipsec-proposal: Display the current IPSec proposal configuration of the router.
fr-class: Display the current fr-class configuration of the router.
voice { aaa | access-number | acct-method | cdr }: Display the current voice
configuration of the router.
Description
Using the display current-configuration command, you can view the currently valid
configuration parameters of the router.
When a set of configurations has been completed, it is necessary to check if they are
correct. You can execute the display current-configuration command to check the
currently valid parameters. The parameters that are already configured but are not yet
valid, will not be shown. For example, if X.25 is encapsulated at a certain interface
link layer, then you can now configure the PPP parameter at this interface. But when
executing the display current-configuration command, you will not see any PPP
configuration information at this interface.
Some currently valid configuration parameters that are the same as the default
running parameters will not be shown.
For related
saved-configuration.
commands, see save, delete, download
System Management
config, display
7