Reset Bridge; Reset Bridge Traffic - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
[3Com]interface bridge-template 1
[3Com-Bridge-Template1]
# Delete the bridge-template interface.
[3Com]undo interface bridge-template 1

8.1.34 reset bridge

Syntax
reset bridge bridge-set
View
All views
Parameter
bridge-set: Bridge set number, an integer in the range of 1 to 63.
Description
Using the reset bridge command, you can reset the entries of all the bridge sets or a
specified bridge set in the MAC address table.
Example
# Clear all information contained in the bridge set 1 in the MAC address table.
[3Com]reset bridge 1

8.1.35 reset bridge traffic

Syntax
reset bridge traffic
View
All views
Parameter
None
Description
Using the reset bridge traffic command, you can reset the bridge set traffic statistics.
This command is used to clear the bridge set statistics. Executing this command will
clear all the data of the counters related to the bridging traffic.
166