Display Dialer Route - 3Com 3C13618 Command Reference Manual

1.1.23 display dialer route

Syntax
display dialer route [ detail ]
View
All views
Parameter
detail: Display the dynamic dialer number mapping information. If the parameter
detail is not input, the static dialer number mapping information will be displayed.
Description
Using the display dialer route command, you can view static configuration or
dynamically generated dialer number mapping information.
For related commands, see dialer route.
Example
# Display the static dialer routes of all the DCC interfaces.
[3Com] display dialer route
(static) dialer route ip 110.1.2.2 (6688049) on AnalogModem0
(static) dialer route ip 115.1.1.1 (6688037) on Dialer1
(static) dialer route ip 115.1.1.1 (6688052) on Dialer1
(static) dialer(static) route ip 3.0.0.2 (660300) on Serial1
# Displays the dynamic dialer routes created by all the DDR interfaces.
[3Com] display dialer route detail
(dynamic) dialer route ip 155.1.1.1 (6688037) on AnalogModem5 : Dial out
Use Sec: 0Idleout Sec: 81
Table 1-2 Information displayed by executing the display dialer route command
State
IP address
Dialer number
Interface
Route type
Field
The route is statically configured or dynamically created.
Remote IP address with which the route is associated
Dialer number for the route to call the remote end
Interface on which the route is created
Type of the interface on which the route is created: Dialer, Receiver, or Callback
Description
Dial-Up
23