Display Bridge Spanning-Tree - 3Com 3C13618 Command Reference Manual

View
All views
Parameter
bridge-set: Bridge set number, an integer in the range of 1 to 63.
Description
Using the display bridge set command, you can view the status of all the bridging
groups.
The states of all the bridge set will be displayed if no bridge set is specified.
Example
# Display the status of all the bridging groups.
[3Com]display bridge set 1
Bridge is enabled.
Port Index
1
2
3

8.1.31 display bridge spanning-tree

Syntax
display bridge spanning-tree
View
All views
Parameter
None
Description
Using the display bridge spanning-tree command, you can view the STP status and
statistics. This command is used to display the STP status and statistics for analyzing
and controlling the traffic. The displayed information includes the global STP
parameters: Root ID, Root Cost, Root Port, Priority, Max Age, Hello, Hold, Forward
Delay, Bridge Address and Root Bridge Address.
Example
# Display the STP status and statistics.
[3Com]display bridge spanning-tree
Port Name State
Serial0 Down(disabled)
Serial1 Down(disabled)
Serial2 Down(disabled)
Link Layer Protocol
163