Display Controller E3 - 3Com 3C13618 Command Reference Manual

3.6.3 display controller e3

Syntax
display controller e3 number
View
All views
Parameter
number: CE3 interface number.
Description
Using the display controller e3 command, you can view the state of the CE3
interface.
This command can be used to display the state of the CE3 interface as well as the
information of each E1 channel when the CE3 interface is working in CE3 mode.
Example
# Display the information of E3 0 interface.
[3Com]display controller e3 0
E3 0 is up
Description : 3Com, E3 0 Interface
Applique type is CE3 - 75 OHM unbalanced Frame-format G751, line code HDB3,
clock slave, national-bit 1,loopback not set
Alarm: none
ERROR: 0 BPV, 0 EXZ, 0 FrmErr, 0 FEBE
E3-0 CE1 1 is up
Frame-format NO-CRC4, clock master, loopback not set
E3-0 CE1 2 is up
Frame-format NO-CRC4, clock slave, loopback local
E3-0 CE1 3 is up
Frame-format NO-CRC4, clock slave, loopback remote
E3-0 CE1 4 is up
Frame-format CRC4, clock slave, loopback not set
E3-0 CE1 5 is up
Frame-format NO-CRC4, clock slave, loopback not set
E3-0 CE1 6 is up
Frame-format NO-CRC4, clock slave, loopback not set
E3-0 CE1 7 is up
Interface Management
61