If-Match Length - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
Description
Using the if-match ip address command, you can configure the IP address matching
conditions. Using the undo if-match ip address command, you can cancel the IP
address matching conditions.
By default, no matching condition is configured.
The introduced ACL may be either a standard or extended ACL.
For related commands, see if-match length.
Example
# Set IP address matching conditions.
[3Com-route-policy] if-match ip address 10

6.1.8 if-match length

Syntax
if-match length min-len max-len
undo if-match length
View
Routing policy view
Parameter
min-len: Minimum length of packets, ranging from 0 to 65535.
max-len: Maximum length of packets, ranging from 0 to 65535.
Description
Using the if-match length command, you can configure matching conditions for the
IP packet length. Using the undo if-match length command, you can cancel
matching conditions for the IP packet length.
By default, packets are not matched regardless the length.
For related commands, see if-match ip address.
Example
# Set to match the packets with the length ranging from 100byte to 200 byte.
136