Dialer Number; Dialer Isdn-Leased - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
Example
# Enable Circular DCC on Serial 0.
[3Com-Serial0] dialer enable-circular

1.1.9 dialer isdn-leased

Syntax
dialer isdn-leased number
undo dialer isdn-leased number
View
Physical or dialer interface view
Parameter
number: Number of the ISDN B channel configured to be a leased line. If the channel
is on a BRI interface, ranges is from 1 to 2. If it is on an CE1/PRI interface, range is
from 0 to 30. If it is on an E1/PRI interface, range is from 0 to 30. If it is on a CT1/PRI
interface, range is from 0 to 23.
Description
Using the dialer isdn-leased command, you can configure an ISDN B channel (can
be either the channel on a BRI or PRI interface) to be the leased line. Using the undo
dialer isdn-leased command, you can cancel the setting.
By default, no ISDN B channel is configured to be leased line.
The user can configure any ISDN B channel to be the leased line without affecting the
settings of other B channels.
Example
# Configure the first B channel on the interface Bri0 to be the leased line.
[3Com-Bri0] dialer isdn-leased 1

1.1.10 dialer number

Syntax
dialer number dial-number
undo dialer number
10