Configuring An Adsl Interface; Upgrading Adsl2+ Card Software - 3Com MSR 50 Series Configuration Manual

Configuring an ADSL
Interface
n
Upgrading ADSL2+ Card
Software
To do...
Enter system view
Enter ATM interface view
Activate the ADSL interface
Configure the ADSL interface
standard
Set the transmit power
attenuation value
To have the adsl standard command take effect, you need to re-activate the
interface either by performing the shutdown and undo shutdown commands
or the activate and undo activate commands.
The upgradeable software includes Boot ROM and card software. You first need to
load the new software by FTP or some other means to the flash memory or the CF
card on your device. Before performing an upgrade, you need to shut down the
interface with the shutdown command if the interface is up. After completing
the upgrade, you need to bring the interface up with the undo shutdown
command.
Follow these steps to upgrade ADSL2+ card software:
To do...
Enter system view
Enter ATM interface
view
Shut down the interface shutdown
Quit to system view
Quit to user view
Upgrade software
Enter system view
Enter ATM interface
view
Bring the interface up
Use the command...
system-view
interface atm
interface-number
clock { master | slave }
adsl standard { auto | g9923
| g9925 | gdmt | glite |
t1413 }
adsl tx-attenuation
attenuation
Use the command...
system-view
interface atm
interface-number
quit
quit
bootrom update file
file-url slot slot-no-list
[ subslot subslot-no-list ]
[ all | part ]
system-view
interface atm
interface-number
undo shutdown
ADSL Interface Configuration
Remarks
--
Required
Optional
The interface is active by
default.
Optional
The default is auto sensing.
Optional
0 by default
Remarks
--
Required
Optional
Skip this step if the interface is already
down.
--
--
Required
Only distributed devices support the slot
slot-no-list option.
The subslot subslot-no-list option is not
available if the device does not support
sub-card-level maintenance.
The highest slot number and the highest
sub-slot number varies with device
models.
--
--
Required
79