Bridge-Set Outbound-Lsap; Bridge-Set Outbound-Type - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00

8.1.19 bridge-set outbound-lsap

Syntax
bridge-set bridge-set outbound-lsap acl acl-number
undo bridge-set bridge-set outbound-lsap acl acl-number
View
Interface view
Parameter
bridge-set: Bridge set number, in the range 1 to 63.
acl-number: Access control list number based on Ethernet type code LSAP, in the
range of 200 to 299.
Description
Using the bridge-set outbound-lsap acl command, you can configure to apply the
ACL encapsulated in IEEE 802.2 form on an outbound interface. Using the undo
bridge-set outbound-lsap acl command, you can cancel the application of the ACL
encapsulated in IEEE 802.2 form on an outbound interface.
This command makes the specified interface only forwards the Ethernet frame that
satisfies certain conditions.
Example
# Apply the ACL 201 encapsulated in IEEE 802.2 form on the outbound Ethernet
interface0.
[3Com-Ethernet0]bridge-set 1 outbound-lsap acl 201

8.1.20 bridge-set outbound-type

Syntax
bridge-set bridge-set outbound-type acl acl-number
undo bridge-set bridge-set outbound-type acl acl-number
View
Interface view
Parameter
bridge-set: Bridge set number, in the range 1 to 63.
acl-number: Access control list number based on Ethernet type code Ethernet-II or
SNAP, in the range of 200 to 299.
156