Display Encrypt-Card Syslog - 3Com 3C13618 Command Reference Manual

3Com Command Reference Guide — V1.00
Parameter
slot-id: The ID of the slot where the crypto card is located. The value range is
determined by the number of the slots on the router. If no value is input, the operation
will be implemented on all the crypto cards.
Description
Using the display encrypt-card status command, you can view the operating status
of the crypto cards saved in the host.
This command is applicable to the crypto card.
By far, the operating states of crypto cards include: invalid (the crypto card is
abnormal), ready (the crypto card is normal), resetting (the crypto card is resetting),
program-updating (the crypto card is updating), unknown (the unidentifiable error
state) and disable (the crypto card is disabled).
If the input slot-id is larger than the slot-number of the router, the system will prompt
"Invalid encrypt-card slot-id".
Example
# Display the operating status of the crypto card.
[3Com] display encrypt-card status
Encrypt-Card 2 status :
Encrypt-Card 3 status :

4.1.9 display encrypt-card syslog

Syntax
display encrypt-card syslog [ slot-id ]
View
All views
Parameter
slot-id: The ID of the slot where the crypto card is located. The value range is
determined by the number of the slots on the router. If no value is input, the operation
will be implemented on all the crypto cards.
50
ready
ready