Qos Cq - 3Com 3C13618 Command Reference Manual

Note:
After this command is configured, you need to restart the interface with the down/up function. Only after
that can QoS sending token function take effect.
Example
# Set the number of QoS sending tokens to 1.
[3Com-Ethernet0] qmtoken 1

2.1.7 qos cq

Syntax
qos cq cql cql-index
undo qos cq
View
Interface view
Parameter
cql-index: The number of CQ, ranging from 1 to 16.
Description
Using the qos cq command, you can configure the CQ list onto the interface. Using
the undo qos cq command, you can cancel the operation of applying the CQ list
onto the interface.
By default, congestion management policy on each interface is FIFO.
To make them work, you should apply the customized queue lists on some certain
interfaces. Although each interface could apply only one list, the same customized
queue list can be applied on several interfaces, so can multiple different customized
queue lists be applied on different interfaces.
For related commands, see qos cql default-queue, qos cql inbound-interface,
qos cql protocol, qos cql queue serving, qos cql queue queue-length.
Example
# Apply the Group 10 of the Customized Queue onto the interface Ethernet 0.
QoS
15