3Com Command Reference Guide — V1.00
Description
Using the display ipsec statistics command, you can view the IPSec packet
statistics.
This command is applicable to the IPSec module of the operating system.
For displaying the IPSec packet statistics, including the input and output security
packet statistics, bytes, packets dropped and detail of such dropped packets.
For related commands, see reset ipsec statistics.
Example
# Display IPSec packet statistics.
[3Com]display ipsec statistics
the security packet statistics:
input/output security packets: 5124/8231
input/output security bytes: 52348/64356
input/output dropped security packets: 0/0
dropped security packet detail:
no enough memory: 0
can't find SA: 0
queue is full: 0
authen failed: 0
invalid length: 0
replay packet: 0
too long packet: 0
invalid SA: 0
4.1.16 encapsulation-mode
Syntax
encapsulation-mode { transport | tunnel }
undo encapsulation-mode
View
IPSec proposal view & proposal view of crypto card
Parameter
transport: Encapsulate packets in transport mode.
tunnel: Encapsulate packets in tunnel mode.
58