Llc2 Timer Reject; Reset Dlsw Bridge-Entry - 3Com 3C13618 Command Reference Manual

6.1.25 llc2 timer reject

Syntax
llc2 timer reject mseconds
undo llc2 timer reject
View
Ethernet interface view
Parameter
mseconds: The REJ status time of LLC2. The value range is 1~60000ms and the
default value is 3200ms.
Description
Using the llc2 timer reject command, you can configure the time waiting for the
correct frame after a reject frame is sent. Using the undo llc2 timer reject command,
you can restore to the default value.
The REJ status time of LLC2 indicates the amount of time the software has waited for
a correct frame after sending a reject command to the remote LLC2 station.
Example
None

6.1.26 reset dlsw bridge-entry

Syntax
reset dlsw bridge-entry
View
All views
Parameter
None
Network Protocol
115