Chapter 7 Hdlc Configuration Commands; Debugging Hdlc; Link-Protocol Hdlc - 3Com 3C13618 Command Reference Manual

Chapter 7 HDLC Configuration Commands

7.1 HDLC Configuration Commands

7.1.1 debugging hdlc

Syntax
debugging hdlc { all | event | hexadecimal | packet }
View
All views
Parameter
all: Enable the output of all the debugging information.
event: Enable the output of the event debugging information.
packet: Enable the output of the packet debugging information.
interface type number: Enable the PPP negotiation debugging of a designated
interface.
Description
Using the debugging hdlc command, you can enable the debugging information of
HDLC packets.
Example
None

7.1.2 link-protocol hdlc

Syntax
link-protocol hdlc
View
Interface view
Parameter
None
Link Layer Protocol
141