3Com 3C13618 Command Reference Manual page 328

Description
Using the mfr window-size command, you can configure the maximum number of the
fragmentations allowed by the multilink Frame Relay interface.
By default, the maximum number of the fragmentations allowed by the multilink Frame
Relay interface is the same as the number of physical interfaces it bundles.
The multilink Frame Relay can adjust the size of the window according to the number of
fragmentations.
For related commands, see interface mfr.
Example
# Set the maximum number of the fragmentations allowed by the multilink Frame Relay
interface to 10.
[3Com-Serial0]mfr window-size 10
6.1.56 pq
Syntax
pq pql list-number
undo pq pql
View
Frame Relay class view
Parameter
list-number: Group number of a priority queue, in the range from 1 to 16.
Description
Using the pq pql command, you can configure the queue type of a Frame Relay PVC to
the Priority Queueing (PQ). Using the undo pq pql command, you can restore the
queue type of the Frame Relay PVC to FIFO .
By default, the queue type of Frame Relay PVC is FIFO.
After the function of traffic shaping is enabled on a Frame Relay interface, each PVC on
this interface will own its independent PVC queue. The queue type of Frame Relay
PVC can be FIFO, PQ, CQ, or WFQ.
For related commands, see cq, wfq, fr pvc-pq.
Example
# Apply Group 10 of the priority queue to class one.
[3Com-fr-class-one]pq pql 10
Link Layer Protocol
135