Fe1 Code; Fe1 Frame-Format - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00

3.4.3 fe1 code

Syntax
fe1 code { ami | hdb3 }
undo fe1 code
View
E1-F interface view
Parameter
ami: Adopts AMI line code format.
hdb3: Adopts HDB3 line code format.
Description
Using the fe1 code command, you can configure line code format for an E1-F
interface. Using the undo fe1 code command, you can restore the default line code
format of interface.
By default, E1-F interfaces adopt hdb3.
The line code of an interface should be set in consistency with that of the peer.
Example
# Set the line code format of the E1-F interface to AMI.
[3Com-Serial0]fe1 code ami

3.4.4 fe1 frame-format

Syntax
fe1 frame-format { crc4 | no-crc4 }
undo fe1 frame-format
View
E1-F interface view
Parameter
crc4: Adopts CRC4 as the frame format for the E1-F interface.
50