Using (Ct3 Interface) - 3Com 3C13618 Command Reference Manual

Example
# Set the first T1 channel of T3 0 as unframed.
[3Com-T3-0]t1 1 unframed

3.7.14 using (CT3 Interface)

Syntax
using { t3 | ct3 }
View
T3/CT3 Interface view
Parameter
t3: T3 operation mode.
ct3: CT3 operation mode
Description
Using the using command, you can configure the operation mode of CT3 interface.
By default, operation mode of CT3 interface is CT3 mode.
The user can configure T1 channels only when the CT3 interface is working in CT3
mode.
When CT3 interface works in T3 mode, the system will automatically create a serial
interface whose number is serial number/0:0 and whose rate is 44.736Mbps. The
interface has the same logic feature as that of a synchronous serial interface;
therefore, it can be regarded as a synchronous serial interface for further
configuration.
Example
# Set T3 0 to work in the T3 mode.
[3Com-T3-0]using t3
Interface Management
81