Display Multicast Forwarding-Table - 3Com 3C13618 Command Reference Manual

View
All views
Parameter
all: all debugging information of PIM-SM.
mbr: debugging information of PIM-SM multicast border router event.
mrt: debugging information of PIM-SM multicast routing table.
timer: debugging information of PIM-SM timer.
warning: debugging information of PIM-SM warning message.
recv: debugging information of PIM-SM receiving packets.
send: debugging information of PIM-SM sending packets.
assert | bootstarp | crpadv | jp | reg | regstop: packets type.
Description
Using the debugging pim sm command, you can enable PIM-SM debugging
information switch. Using the undo debugging pim sm command you can
disable PIM-SM debugging information switch.
By default, the system turns off PIM-SM debugging information switch.
Example
None

2.1.8 display multicast forwarding-table

Syntax
display multicast forwarding-table [ group-address | source-address ]
View
All views
Parameter
group-address: Multicast group address to be viewed.
source-address: Multicast source address to be viewed.
Description
Using the display multicast forwarding-table command, you can view IP
multicast forwarding table information.
This command will display IP multicast forwarding table information, including (S,
G), packet input interface, output interface information, and forwarding conditions.
Multicast Protocol
15