Debugging Pos-Interface; Display Fcm - 3Com 3C13618 Command Reference Manual

Example
None

5.1.4 debugging pos-interface

Syntax
debugging pos-interface [ pos-number ]
View
All views
Parameter
pos-number: POS access port number, in the range of 0 to 127.
Description
Using the debugging pos-interface command, you can enable debugging of the
POS access interface.
This command is used to enable debugging of the POS access interface. If undo
interface is specified, it will enable debugging of all interfaces. The information
displayed includes the name of the interface receiving the packet, packet type,
discarded packets, packet content, TPDU and buffer overflow.
Example
None

5.1.5 display fcm

Syntax
display fcm
View
All views
Parameter
None
System Management
85