Encrypt-Card Enable - 3Com 3C13618 Command Reference Manual

Parameter
slot-id: The ID of the slot where the crypto card is located. The value range is
determined by the number of the slots on the router. If no value is input, the operation
will be implemented on all the crypto cards.
Description
Using the encrypt-card disable command, you can disable the crypto cards.
This command is applicable to the crypto cards.
If there are crypto cards plugged in the router, you can use the command enable or
disable to flexibly manage the crypto cards. According to the actual requirements,
you can set the crypto cards to be in disabled status (disable the crypto cards to
process data) or enabled status. It will facilitate the maintenance, management and
debugging.
For related commands, see encrypt-card enable.
Example
# Disable the crypto card in Slot 0.
[3Com] encrypt-card disable 0

4.1.19 encrypt-card enable

Syntax
encrypt-card enable [ slot-id ]
View
System view
Parameter
slot-id: The ID of the slot where the crypto card is located. The value range is
determined by the number of the slots on the router. If no value is input, the operation
will be implemented on all the crypto cards.
Description
Using the encrypt-card enable command, you can enable the crypto cards.
This command is applicable to the crypto cards.
Security
61