Ospf Enable; Ospf Enable Area - 3Com 3C13618 Command Reference Manual

Example
# Set the priority at Serial 0 during election of the DR to be 8.
[3Com-Serial0] ospf dr-priority 8

3.1.26 ospf enable

Syntax
ospf enable
undo ospf enable
View
System view
Parameter
None
Description
Using the ospf enable command, you can enable OSPF. Using the undo ospf
enable command, you can disable OSPF.
By default, no OSPF is defined.
If OSPF is running already, use ospf command to enter the OSPF view.
For related commands, see ospf enable area.
Example
# Start OSPF.
[3Com] ospf enable

3.1.27 ospf enable area

Syntax
ospf enable area area_id
undo ospf enable area area_id
View
Interface view
Routing Protocol
57