Dlsw Local - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00

6.1.11 dlsw local

Syntax
dlsw local ip-address [ init-window init-window-size ] [ max-frame max-frame-size ]
[ max-window max-window-size ] [ permit-dynamic ] [ vendor-id vendor-id ]
undo dlsw local
View
System view
Parameter
ip-address: The IP address of the peer entity..
init-window init-window-size: The size of the initial local response window. The value
range is 1-2000 bytes and the default value is 40 bytes..
max-frame max-frame-size: The max frame length. The value available is 516, 1470,
1500, 2052, 4472, 8144, 11407, 11454 and 17800 bytes. The default value is 1500
bytes.
max-window max-window-size: The size of the max local response window. The
value range is 1-2000 bytes and the default value is 50 bytes.
promiscuous: Indicate that the remote router not configured beforehand is allowed
to initiate connection and create peer entity dynamically. The end using the
parameter doesn't need to configure the remote peer entity, instead waiting for the
remote end to initiate connection.
vendor-id vendor-id: Vender ID, used to ensure the intercommunication with the
devices of other manufacturers, in the range from 00.00.00 to FF.FF.FF. By default,
vendor-id is 00.E0.FC.
Description
Using the dlsw local command, you can configure entities of the DLSw local peer.
Using the undo dlsw local command, you can cancel the entities.
Creating TCP channel is the first step for establishing the DLSw connection. To
create the TCP channel, you have to firstly configure the DLSw local peer entity in
order to specify the IP address of the local end for establishing TCP connection, the
request sent by the remote end router can then be received for establishing TCP
connection. One router can only have one local peer entity.
104