Display Nat - 3Com 3C13618 Command Reference Manual

Parameter
event: Enable the NAT event information debugging.
packet: Enable the NAT data packet information debugging.
Description
Using the debugging nat command, you can enable the NAT information debugging,
Using the undo debugging nat command, you can disable the NAT information
debugging.
Example
# Enable NAT events Debugging functions
[Quidway]debugging nat event

2.6.2 display nat

Syntax
display nat
View
All views
Parameter
None
Description
Using the display nat command, you can view information on the NAT Translations
items.
This command displays the configuration of the address translation by the user. The
user can verify if the configuration of the address translation is correct according to
the input information of this command.
Example
# Display the NAT configure information.
[Quidway] display nat
Nat address-group Information:
pool1 from 202.110.10.10 to 202.110.10.12
Network Protocol
41