Flow-Interval - 3Com 3C13618 Command Reference Manual

View
All views
Parameter
None
Description
Using the display interfaces brief command, you can view information on the
physical status and protocol status of all interfaces.
This command is the simplified form of the display interfaces command. It can be
used to display the brief information on the physical status and protocol status of all
interfaces.
For related commands, see display interfaces.
Example
# Display the information on the physical status and protocol status of all the
interfaces.
[3Com]display interfaces brief
Aux0 is up, line protocol is up (spoofing)
Link-protocol PPP
Bridge-Template1 is up, line protocol is up
Dialer1 is up (spoofing), line protocol is up (spoofing)
Link-protocol PPP
Ethernet0 is up, line protocol is up (loop)
Internet address is 1.1.1.1 255.255.255.0 1.1.1.255
Internet address is 1.1.2.2 255.255.255.0 1.1.2.255 sub
Ethernet1 is down, line protocol is down
Hardware address is 00-e0-fc-99-00-33
Auto-Negotiation is enabled, Half-duplex, 10Mb/s
Serial0 is standby, line protocol is down
Link-protocol X.25
Serial1 is standby, line protocol is down
Link-protocol PPP

1.1.4 flow-interval

Syntax
flow-interval minutes
Interface Management
7