Interface Management Configuration Commands; Description - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
Chapter 1 Interface Management Configuration

1.1 Interface Management Configuration Commands

1.1.1 description

Syntax
description interface-description
undo description
View
Interface view
Parameter
interface-description: Description of character string of the router interface, up to 80
characters. By default, the description is "3Com Router, xxxxx interface".
Description
Using the description command, you can configure the description of an interface.
Using the undo description command, you can restore the default description.
This command is used only to identify an interface and does not have special
meaning and usage.
For related commands, see display interfaces.
Example
# Set the interface Ethernet 0 description as "3Com Router 5680 ethernet interface".
[3Com]interface ethernet 0
[3Com-Ethernet0]description 3Com Router 5680 ethernet interface
4
Commands