Pos-Server Source-Ip - 3Com 3C13618 Command Reference Manual

At present, 3Com series routers support up to 32 applications.
Example
# Configure to send the packet from destination address 01f1 to application 2.
[3Com] pos-server map 01f1 2
# Configure to send the packets with no destination address to the default application
0.
[3Com] pos-server map default 0

5.1.13 pos-server source-ip

Syntax
pos-server source-ip app-number ip-address
undo pos-server source-ip app-number
View
System view
Parameter
app-number: Application number, used to identify the TCP connection the IP address
of the connection is to be bounded, ranging from 0 to 31.
ip-address: Bound IP address.
Description
Using the pos-server source-ip command, you can bind the source address of the
TCP connection. Using the undo pos-server source-ip command, you can cancel
the binding of the source address of the TCP connection.
When using several POS terminal multiplex one TCP connections to set up relations
with the application, it is necessary to hide the true IP address of the up(?) TCP
connection in the access service and set other IP address for the source address
instead for the sake of security. In general, the source address to be bounded is that
of the interface which is not used on the router, such as Dialer interface or loopback
interface.
This command can be applied only to the application in TCP connection, and the
application state is that the TCP connection has not been implemented, otherwise,
the system will prompt as follows to indicate that the configuration has failed.
App-state is wrong.
System Management
93