3Com 3C13618 Command Reference Manual page 852

3Com Router Command Reference Guide — V1.00
View
Interface (asynchronous serial interface, AUX or AM port) view
Parameter
script-name: The name of Modem script.
Description
Using the script trigger dial command, you can configure the Modem script that is
used for DCC dialing. Using the undo script trigger dial command, you can cancel
the feature.
By default, the system does not specify the script.
If this command is configured, the specified script will be executed for DCC dialing.
For related commands, see script-string, start-chat, script trigger login , script
trigger connect , script trigger logout, script trigger init.
Example
# Specify the script "example" to be used for DCC dialing.
[3Com-Serial0]script trigger dial example
2.1.8 script trigger init
Syntax
script trigger init script-name
undo script trigger init
View
Interface (asynchronous serial interface, AUX or AM port) view
Parameter
script-name: The name of Modem script.
Description
Using the script trigger init command, you can configure the Modem script that will
be executed when the system is powered on and rebooted. Using the undo script
trigger init command, you can cancel this feature.
32