Peer Reflect-Client - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
Using the undo peer next-hop-local command, you can prohibit the configuration of
making the address of a hop as the next hop address.
By default, this feature is disabled.
Example
# Enable BGP processing of next hop when sending a route to the peer and take the
self-address as the next hop.
[3Com-bgp] peer test next-hop-local

4.1.42 peer reflect-client

Syntax
peer { group-name | peer-address } reflect-client
undo peer { group-name | peer-address } reflect-client
View
BGP view
Parameter
group-name: group name.
peer-address: peer's IP address.
Description
Using the peer reflect-client command, you can configure the peer as a route reflector client.
Using the undo peer reflect-client command, you can cancel the peer as the route
reflector client.
Generally speaking, it is not necessary to configure this command for the peer group,
because the IBGP peers are in its default group. Use the peer peer-address
reflect-client command to configure the single route reflector client.
For related commands, see reflect between-clients, reflect cluster-id.
Example
# Configure the whole peer group "test" as the route reflector client.
[3Com-bgp] peer test reflect-client
102