Display Encrypt-Card Details - 3Com 3C13618 Command Reference Manual

4.1.4 display encrypt-card details

Syntax
display encrypt-card details [ slot-id ]
View
All views
Parameter
slot-id
determined by the number of the slots on the router. If no value is input, the operation
will be implemented on all the crypto cards.
Description
Using the display encrypt-card details command, you can view the detailed
information of the crypto cards.
This command is applicable to crypto cards.
The command is used to query the information like status of the crypto cards, byte
sequence and hardware address. Besides, it can be used to query the debugging
status, all the statistics and the statistic information one second before executing the
command. The information includes: the number of packets, bytes transmitted and
received by the crypto cards, and the number of packets discarded per second. If the
input slot number is greater than the number of the slots on the router, the prompt
"Invalid encrypt-card slot-id." will be displayed.
Example
# Display how to query the statistics of the handling process of the crypto cards.
[3Com] display encrypt-card details
Encrypt-Card 0 Details :
Status
Driver Status :
Byte Order
CmdTimerID
TdbTimer
RecentErrors
Debug Switch
command debug switch :
error
The ID of the slot where the crypto card is located. The value range is
: ready
ready
: not consistent with the host
: 0x00000006
: 0x00001ded
: 0x00000000
:
debug switch :
off
off
Security
45