3Com 3C13618 Command Reference Manual page 98

3Com Router Command Reference Guide — V1.00
filter: Enable the information filtering.
facility: The filtering module name.
Description
Using the info-center monitor command, you can enable the log output to the telnet
or dumb terminal. Using the undo info-center monitor command, you can disable
the log output to the telnet or dumb terminal.
The info-center monitor command is used to configure log output to the remote
Telnet terminal, which can be used for remote debugging. The parameter all is used
in undo info-center monitor all only, indicating that the log system is disabled to
send log information to any Telnet or dummy terminal. undo info-center monitor
indicates that the log system is disabled to send log information to the local terminal.
For related commands, see display info-center, display current-configuration.
Example
# Enable output of hdlc module information in Chinese to the current telnet terminal or
dummy terminal.
[3Com] info-center monitor filter hdlc Chinese
# Disable log output to all telnet and dummy terminals.
[3Com] undo info-center monitor all
82