Chapter 3: Security; Storm Control; Table 17: Storm Control - Allied Telesis IS230-10GP Reference Manual

Chapter 3
Security

Storm Control

Function
show storm-control User EXEC
show storm-con-
trol interfaces
IF_NMLPORTS
storm-control ifg
(include|exclude)
storm-control unit
(bps|pps)
[no] storm-control Admin EXEC
[no] storm-con-
trol (broad-
cast|unknown-
unicast|unknown-
multicast)
The following feature commands are included in this chapter:
"Storm Control"

"Port Security" on page 48

"802.1X" on page 49

"Account Manager" on page 50

"DoS Attack Prevention" on page 50

"IP Security" on page 52

The Storm Control page allows you to setup the units and Preamble/IFG
to manage the occurrence of packet flooding on the LAN and consequent
traffic to prevent the degrading of network performance.
Table 17. Storm Control
Privilege Description
Display storm-control infor-
mation.
User EXEC Display storm-control infor-
mation in specified inter-
face.
Admin EXEC Decide whether to include/
exclude the preamble and
inter frame gap into the cal-
culation or not.
Admin EXEC Set the unit of calculation
method.
Disable or enable storm-
control.
Admin EXEC Disable or enable storm-
control type.
Example
switch# show storm-control
switch# show storm-control
interfaces fa5
switch(config)# storm-control
ifg include
switch(config)# storm-control
unit bps
switch(config)# storm-control
switch(config-if)# storm-con-
trol broadcast
47